A technician is troubleshooting a slow WLAN and decides to use the split-the-traffic approach. Which two parameters would have to be configured to do this? (Choose two.)
- Configure the 2.4 GHz band for basic internet traffic that is not time sensitive.
- Configure the security mode to WPA Personal TKIP/AES for both networks.
- Configure the security mode to WPA Personal TKIP/AES for one network and WPA2 Personal AES for the other network
- Configure a common SSID for both split networks.
- Configure the 5 GHz band for streaming multimedia and time sensitive traffic.
-
Answers Explanation & Hints: To use the split-the-traffic approach for troubleshooting a slow WLAN, the two parameters that would need to be configured are:
- Configure the 2.4 GHz band for basic internet traffic that is not time-sensitive: This means that the 2.4 GHz band should be configured to handle non-critical traffic such as browsing, email, and other general internet usage. This will help reduce congestion on the 5 GHz band, which can be reserved for time-sensitive traffic.
- Configure the 5 GHz band for streaming multimedia and time-sensitive traffic: This means that the 5 GHz band should be reserved for traffic that is latency-sensitive such as video streaming, voice over IP (VoIP), and online gaming. By reserving the 5 GHz band for these types of traffic, it will help ensure that the traffic is prioritized and receives adequate bandwidth.
Configuring the security mode to WPA Personal TKIP/AES for one network and WPA2 Personal AES for the other network, configuring a common SSID for both split networks, and configuring the security mode to WPA Personal TKIP/AES for both networks are not directly related to implementing the split-the-traffic approach for troubleshooting a slow WLAN.