A technician is configuring a router for a small company with multiple WLANs and doesn’t need the complexity of a dynamic routing protocol. What should be done or checked?
- Check the configuration on the floating static route and adjust the AD.
- Create a floating static route to that network.
- Verify that there is not a default route in any of the edge router routing tables.
- Create static routes to all internal networks and a default route to the internet.
Answers Explanation & Hints:
For a small company with multiple WLANs that does not require a dynamic routing protocol, the following steps should be taken:
- Create static routes to all internal networks: This ensures that the router knows how to reach all internal networks.
- Create a default route to the internet: This ensures that traffic destined for the internet is sent to the appropriate gateway.
- Verify that there is not a default route in any of the edge router routing tables: This prevents any potential routing loops.
Creating a floating static route or adjusting the administrative distance (AD) are not necessary in this scenario as there is no mention of a backup or secondary path, and the requirement is for a simple solution that does not involve dynamic routing protocols.