A technician is configuring a new Cisco 2960 switch. What is the effect of issuing the BranchSw(config-if)# duplex full command?
- It allows data to flow in both directions at the same time on the interface.
- It allows data to flow in only one direction at a time on the interface
- It automatically adjusts the port to allow device connections to use either a straight-through or a crossover cable.
- It configures the switch as the default gateway.
- It encrypts user-mode passwords when users connect remotely.
-
Answers Explanation & Hints: The “duplex full” command is used to set the duplex mode of an interface on a Cisco switch to full-duplex. Full-duplex mode allows data to flow in both directions simultaneously on the interface, effectively doubling the potential bandwidth.
Therefore, the correct answer is: “It allows data to flow in both directions at the same time on the interface.”
The “duplex full” command does not allow data to flow in only one direction at a time on the interface, automatically adjust the port to allow device connections to use either a straight-through or a crossover cable, configure the switch as the default gateway, or encrypt user-mode passwords when users connect remotely.